'LOVE' Layout with Peaceful Peonies Collection CCDT - 1220

Hello Everyone,
Welcome to my next project using the pretty Peaceful Peonies Collection.

The more layouts I do the more I like them.  This one I wanted to add 'Hearts' and try a few techniques that were new to me like background stamping, background stencil work, multiple matting layers, and working with vellum and acetate.  So here goes, hope you like it too.

1.  I started by adding a backing sheet of cardstock to the main page just to give it a bit more support.	2.  Next I trimmed 13cm from the top of sheet 01A and 4mm from the other 3 sides - this creates a border of the Silver  Star cardstock.  Glue the papers in place, then apply a coat of clear Gesso over both - allow to dry.
3.  Inspired by Shobi's tip of being able to use the transparent Yupo paper to create a stencil, I went to work to see if I could.  I had to use my ScanNCut machine to create this stencil.  I first die cut these 2 dies out of black card to get a better scanning image, scanned them in and then using the program I removed the outer lines - this allowed the die cut to stay in the Yupo paper.  I played around a bit with the flowers so they looked layered - more to learn here for me on another day.	4.  I used texture paste for the Lattice stencil.   .
5.  Using my new stencils and paste I applied background images over my layout allow to dry	6.  Next I did some random background stamping with the Cursive Mini stamp and the 2 inks - Dark Grey and Silver.
7.  Now to create the elements.  I inked the Spotted Butterfly mini stamp with the Silver pigment ink, stamped it onto the Acetate, sprinkled clear embossing powder over stamped image, set it with the heat gun then fussy cut image.	8.  Similiar process as previous step but used the stamp and die leaf from the Peony & Leafy Branch Stamp & Die set, vellum, stamped with and heat set image with white embossing powder - I made 5 of these.
9.  I die-cut 5 small hearts from the Hearts Nesting die set out of  the Cherry-Cola and Snow White cardstock then embossed  3 in the embossing folder.  I smudged some Silver and Coral pigment ink over these cutouts.  I die-cut the Love Delightful Sentiment out of Silver Glitter card.  Fussy cut around lace trim on sheet 09A and flowers from sheet 06A.  I inked the edges of the flowers with Silver and Coral pigment ink.	10.  To create a heart frame I positioned the 2 dies like this and taped them together before die-cutting them out of the Silver Glitter card
11. Heart frame cut out, keep the smaller heart for another project.	12.  Next I cut the 9 mats and backed cardboard behind the 4 sizes as shown.   (My first figure is the width measurement, the second is the length)   A = Black & White Photo measures 3" x 4".  B = Woodgrain pattern from sheet 09A - 2 1/2" x 4".  C = Silver Cardstock - 3 1/4" x 4 1/2".  D 1&2= Lace pattern from bottom of sheet 09A -  D1 - 1 1/2" x 2", D2 - 2 1/2" x  whatever is left, E = Woodgrain pattern from sheet 09A - 1 1/2" x 2", F = Pink Dot pattern from sheet 01B - 1" x 7",  G 1&2  = Green Leaf pattern from sheet 06B - G1 = 3/4" x 3", G2 = 3" x 3/4",  H = Pink Dot pattern from sheet 01B - 3" x 4".
13.  The photo edge can be sanded off with a sander or sandpaper.  The other edges are distressed and inked with the 3 inks randomly around the edges.	14.  Glue all the mats together - just play around with offsetting them to create different lines and colours.  Drape the silver heart frame over this arrangement.
15.  It's all about putting it all together now.  I used glue to attach almost everything.  I added either cardboard or double-sided foam squares to the back of elements if I wanted more height.  This is the Love and Hearts area.	16.  The acetate butterfly arrangement.  Behind the butterfly I felt I put too much coral ink  on so I sprinkled some glitter over it and it seemed to look like it was meant to be there instead of a cover-up of a mistake.
17.  A close up of the background stenciling and stamping, squggles from black fineliner,  bow, fussy-cut and die-cut flowers with pearls.  The  Layered Trilliums were cut from Snow white cardstock, hit with a spray of glimmer mist, splash of coral paint in the centre area and topped with a pearl centre,  I softly bent the petals  before gluing them in place	18.  A Closer look at the pearls and muslin placement.

My Finished Layout

Couture Creations Products Used:-

CO727351-Peaceful Peonies Paper Pad 6.5 x 6.5 Sheet 06A&B & 09A

CO727350-Peaceful Peonies Paper Pad 12 x 12 Sheet 01A&B

ULT200004-Cardstock Silver Star 216gsm

ULT200001-Cardstock Snow White 250gsm

ULT200070-Cardstock Cherry Cola 250gsm

CO727166-A4 Silver Glitter card 250gsm

CO724317A-A4 Acetate Sheet

CO727340-Yupo Paper Ttransparent A4 120gsm

CO727383-Die Layered Trilliums

CO727386-Die Latticework         

CO727421-Die & Stamp Stamp-Die set Peony Leafy Branch

CO727405-Stamp Spotted Butterfly
CO727407-Stamp Cursive Mini Stamp

CO726960-Die Delightful Sentiments Love
CO724868-Texture Paste - Gloss Finish      

CDEIPL011-Pigment Ink Coral

CDEIPL028-Pigment Ink Silver

CDEIPU036-Dye Ink Dark Grey
CO72378-Heat Gun
CO726520-GoPower & Emboss Machine (Die-Cutting Machine)
White Embossing Powder
3D Adhesive Foam Squares

Scissors
Adhesive Pearls
Die Nesting Hearts

Swiss Dots Embossing Folder bonus with the GoPower and Emboss Machine.

Other Products Used:

Clear Gesso,Vellum,Versamark,Muslin,Coral coloured ribbon bow,Glimmer Spray,Glitter,Glue,Cardboard,Black fine-tip marker,Water Brush and ScanNCut Machine.

1.  I started by adding a backing sheet of cardstock to the main page just to give it a bit more support.

2.  Next I trimmed 13cm from the top of sheet 01A and 4mm from the other 3 sides - this creates a border of the Silver  Star cardstock.  Glue the papers in place, then apply a coat of clear Gesso over both - allow to dry.

3.  Inspired by Shobi's tip of being able to use the transparent Yupo paper to create a stencil, I went to work to see if I could.  I had to use my ScanNCut machine to create this stencil.  I first die cut these 2 dies out of black card to get a better scanning image, scanned them in and then using the program I removed the outer lines - this allowed the die cut to stay in the Yupo paper.  I played around a bit with the flowers so they looked layered - more to learn here for me on another day.

4.  I used texture paste for the Lattice stencil.   .

5.  Using my new stencils and paste I applied background images over my layout allow to dry

6.  Next I did some random background stamping with the Cursive Mini stamp and the 2 inks - Dark Grey and Silver.

7.  Now to create the elements.  I inked the Spotted Butterfly mini stamp with the Silver pigment ink, stamped it onto the Acetate, sprinkled clear embossing powder over stamped image, set it with the heat gun then fussy cut image.

8.  Similiar process as previous step but used the stamp and die leaf from the Peony & Leafy Branch Stamp & Die set, vellum, stamped with and heat set image with white embossing powder - I made 5 of these.

9.  I die-cut 5 small hearts from the Hearts Nesting die set out of  the Cherry-Cola and Snow White cardstock then embossed  3 in the embossing folder.  I smudged some Silver and Coral pigment ink over these cutouts.  I die-cut the Love Delightful Sentiment out of Silver Glitter card.  Fussy cut around lace trim on sheet 09A and flowers from sheet 06A.  I inked the edges of the flowers with Silver and Coral pigment ink.

10.  To create a heart frame I positioned the 2 dies like this and taped them together before die-cutting them out of the Silver Glitter card

11. Heart frame cut out, keep the smaller heart for another project.

12.  Next I cut the 9 mats and backed cardboard behind the 4 sizes as shown.   (My first figure is the width measurement, the second is the length)   A = Black & White Photo measures 3" x 4".  B = Woodgrain pattern from sheet 09A - 2 1/2" x 4".  C = Silver Cardstock - 3 1/4" x 4 1/2".  D 1&2= Lace pattern from bottom of sheet 09A -  D1 - 1 1/2" x 2", D2 - 2 1/2" x  whatever is left, E = Woodgrain pattern from sheet 09A - 1 1/2" x 2", F = Pink Dot pattern from sheet 01B - 1" x 7",  G 1&2  = Green Leaf pattern from sheet 06B - G1 = 3/4" x 3", G2 = 3" x 3/4",  H = Pink Dot pattern from sheet 01B - 3" x 4".

13.  The photo edge can be sanded off with a sander or sandpaper.  The other edges are distressed and inked with the 3 inks randomly around the edges.

14.  Glue all the mats together - just play around with offsetting them to create different lines and colours.  Drape the silver heart frame over this arrangement.

15.  It's all about putting it all together now.  I used glue to attach almost everything.  I added either cardboard or double-sided foam squares to the back of elements if I wanted more height.  This is the Love and Hearts area.

16.  The acetate butterfly arrangement.  Behind the butterfly I felt I put too much coral ink  on so I sprinkled some glitter over it and it seemed to look like it was meant to be there instead of a cover-up of a mistake.

17.  A close up of the background stenciling and stamping, squggles from black fineliner,  bow, fussy-cut and die-cut flowers with pearls.  The  Layered Trilliums were cut from Snow white cardstock, hit with a spray of glimmer mist, splash of coral paint in the centre area and topped with a pearl centre,  I softly bent the petals  before gluing them in place

18.  A Closer look at the pearls and muslin placement.

To find a store near you that stock these Couture Creations products, click on the following link:-
https://couturecreations.com.au/pages/store locator

My Blog Link is:  Card Craft Kaylee

Thanks for joining me...

#artdecocreations   #couturecreationsaus    #ultimatecrafts 

February 2020 'One Sheet Wonder' Challenge

These are my projects for the Couture Creations February 2020 'One Sheet Wonder' Challenge

I made 6 cards using one sheet from the 'Peaceful Peonies' as the base.  I tried to use the same elements on all cards  - it's amazing how many variations you can do - good fun.

This was the cuts I used from the one sheet to do my cards.

'SPECIAL SOMEONE' LAYOUT - CCDT 1120

'SPECIAL SOMEONE' LAYOUT

My finished 'Special Someone' Layout

Hello Everyone,

Welcome to my next project.  Working with the lovely 'Peaceful Peonies' Collection from Couture Creations.  When I saw the sentiment stamp that had the words 'Special Someone' I just knew I had to use it.  The photo is of my new little grand-daughter, one week old.  The photo was taken by Jessica Wright.  So here goes..

1.  I started by adding a backing sheet to the design paper to give it more support.

2.   Used an old flower die from  Couture Creations'  Secret Treasures Collection to make some flowers.  I used watercolour pad 300 gsm paper as it looked like the 'mulberry paper' that is used in a lot of flowers.  I cut 3 sets out.

3.  I coloured the centres of the flowers with Beige and the petals with Coral pigment inks, both sides.

4.  I then sprayed the flowers with water, folded the petals over onto themselves,  twisted them, then gently unfolded the petals back open then allowed them to dry.

5.  Fussy cut all the flowers from sheet 03A

6.  Prepare all the other elements - Die-cut all, tie a 3-looped bow and back the matting pieces with cardboard.  The Mat sizes (from top down) are 10cm x 8 cm, 7cm x 6cm, 6cm x 3.5cm, 6cm x 3.5cm and photo is 7cm x 10cm.

7.  I Stamped the Cursive writing stamp with silver pigment ink onto acetate, sprinkled clear embossing powder over that then set it with a heat gun.  Once it was dry I loosely cut around the outside of the heart shaped die so I had some meat to glue to the bigger frame. 

8.  I glued the embossed acetate piece to the underside of the large heart frame.  Glue and layer all the matting pieces, drape the two heart frames around the photo. 

9.  Assemble and glue all these pieces in place.

10.  Tuck and glue all these pieces around the bottom left of page.

11.  I masked off the top wording of the sentiment stamp before I inked it with clear ink, onto the vellum.  I then sprinkled white embossing powder over that, then set them with the heat gun.  Tuck and glue pieces in place as shown.

12.  The finished Layout

Couture Creations Products Used:-

CO727351  Peaceful Peonies Paper Pad 6.5 x 6.5 Sheet 03A, 06B

CO727350  Peaceful Peonies Paper Pad 12 x 12 Sheet 01A, 08B

ULT200004 Cardstock Silver Star 216gsm

ULT200002 Cardstock Delicate Medlar 216gsm
ULT200021 Cardstock Caloden 250gsm

CO727175  A4  Baby Pink Glitter Card 250gsm
CO727177  A4 White Glitter Card 250gsm

CO724317A A4 Acetate Sheets 250 mic

CO727407  Stamp  Cursive Mini Stamp
CO727385 Dies Framed Fleur De Lis 2 pce set
CO727396 Die  Floral Circle
CO727388 Die  Leafy Branch
CO727390 Die  Cornered Leaves 2
CO727392 Die  Tall Branches
CO727383  Die  Layered Trillium

                    Die  Nesting Hearts

CO723524  Die Retro Flowers from 'Secret Treasures ' Collection

          

CDEIPL011 Pigment Ink Coral

CDEIPL028 Pigment Ink Silver
CDEIPL019 Pigment ink Beige

Other Products Used:

Watercolour Pad 300gsm paper, Vellum, Clear embossing ink, White Embossing Powder, Muslin, Adhesive pearls, Coral coloured ribbon bow,  Double-sided adhesive foam squares, Glue, cardboard, scissors, water pen, Heat Gun, and die-cutting machine.

To find a store near you that stock these Couture Creations products, click on the following link:-

https://couturecreations.com.au/pages/store locator

My Blog Link is:  Card Craft Kaylee

Thanks for joining me...